The Silkland DP80 DisplayPort Cable review centers on a short, VESA-certified DP 2.1 cable built for high-bandwidth gaming setups. Its 1.6-foot length and 80Gbps specification make it a focused choice for connecting nearby compatible monitors and graphics cards.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers pairing DP 2.1 UHBR20 capable graphics cards and monitors for high refresh rates or multi-monitor setups.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data rate and UHBR20 support.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.
Pros
- Very high listed bandwidth and refresh-rate ceilings for a short DisplayPort cable.
- Gaming-oriented features include VRR, ALLM, DSC and MST.
Consider before buying
- At 1.6 feet, its reach is suited to close components and may not work for a tower placed far from the monitor.
- The highest listed display modes depend on the graphics card, monitor and settings supporting the relevant standards; the cable alone cannot enable them.
Read the full review summary
The DP80 pairs a compact 1.6-foot reach with support for DisplayPort 2.1 UHBR20 and up to 80Gbps bandwidth.
The feature set targets demanding display modes, including uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC expands the listed ceiling to higher combinations such as 16K at 60Hz and 4K at up to 540Hz.
These are capability ceilings, and actual modes depend on the connected devices and configuration.
Its best fit is a desk where the monitor sits close to a DP-equipped PC and both ends can take advantage of the cable's higher bandwidth.
Triple shielding, tinned copper conductors and a braided nylon exterior are practical construction details for a cable that may be routed or moved, while the no-latch plug is designed for simpler removal.
If your devices use older DisplayPort versions, backward compatibility is listed, though they will not gain modes beyond their own capabilities.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The 80Gbps DP 2.1 UHBR20 specification and broad high-refresh mode list suit compatible high-end displays.
Short-run practicality
The 1.6-foot length is tidy for nearby equipment, but gives little slack for distant devices or elaborate routing.
Gaming features
VRR, ALLM, FEC, DSC and MST support cover several gaming and multi-monitor use cases.
Build details
Triple shielding, tinned copper, gold-plated connectors and a nylon exterior are useful construction choices.
Compatibility guidance
Backward compatibility is useful, and the product description clearly identifies DP 2.1 UHBR20 at both ends as the ideal pairing.
Setup flexibility
A short cable helps with close connections but is limiting where the PC and display are separated.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data rate and UHBR20 support.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors, 1.6-foot length, no-latch design and grey nylon exterior.
- Uses 28AWG tinned copper conductors, triple shielding and 24K gold-plated connectors; includes 24-month service and technical support.
Pros and Cons of Silkland DP80 Cable
Pros
- Very high listed bandwidth and refresh-rate ceilings for a short DisplayPort cable.
- Gaming-oriented features include VRR, ALLM, DSC and MST.
- Multiple shielding and exterior details address signal interference and everyday handling.
- Backward compatibility and several audio formats make it usable with a range of DP setups.
Consider before buying
- At 1.6 feet, its reach is suited to close components and may not work for a tower placed far from the monitor.
- The highest listed display modes depend on the graphics card, monitor and settings supporting the relevant standards; the cable alone cannot enable them.
- Its DP-to-DP connectors do not suit a setup that needs HDMI or another connector type.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your PC and monitor are close together and both have DisplayPort connections.
It is particularly relevant when you want a cable specified for UHBR20 bandwidth and your display chain can use high refresh rates or advanced DSC modes.
The shielding, braided exterior and no-latch plugs also make sense for a tidy connection that may need to be unplugged occasionally.
Before choosing it, confirm the distance between ports and check the supported DisplayPort version and desired resolution and refresh rate at both ends.
Who should skip it
Choose a longer cable if your PC and monitor are separated by more than a short desk run or need extra slack for routing.
Look for another connector type if either device lacks a DisplayPort port, or avoid paying for DP 2.1 headroom if your monitor and graphics card only need a more modest link.
What the Silkland DP80 Cable Means for a Gaming Setup
Bandwidth is only useful when both ends support it
UHBR20 and the 80Gbps ceiling place this cable in the high-bandwidth tier. The listed resolutions and refresh rates give buyers useful targets, but the graphics card, monitor and chosen settings determine which modes are available.
Check both device specifications for DP 2.1 UHBR20 if you are buying specifically for the top listed modes.
DSC changes the available combinations
The product distinguishes uncompressed modes from higher combinations available with DSC. That distinction matters when comparing a monitor's maximum resolution and refresh rate: verify whether the mode you want requires DSC and whether both devices support it.
The cable's stated support does not by itself establish a particular setup's output.
The short length shapes placement
A 1.6-foot cable can keep a close desktop connection neat and reduce excess cable to manage.
It leaves less freedom to reposition a tower or route around a desk, so measure the path between the computer and display, allowing for bends and connectors, before ordering.
Build features support routine handling
Triple shielding and tinned copper are intended to support signal integrity, while the nylon exterior is described as more resistant to bending and wear than PVC.
The connectors have no latch, which simplifies unplugging; make sure the cable is routed so it is not pulled or bent sharply during use.
Alternatives to Silkland DP80 Cable
One alternative is included because it offers a useful length and bandwidth tradeoff for a similar DisplayPort connection.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort Cable, 10 ft
Choose the DP80 when a short run and higher bandwidth ceiling match a compatible setup. The 10-foot model is more suitable when reach is the priority and its listed 54Gbps modes meet the monitor and graphics card requirements.
- This 10-foot Silkland DisplayPort cable is specified at 54Gbps and lists 16K at 60Hz with DSC, 8K at 120Hz and 4K at 240Hz.
- It is backward compatible through DisplayPort 1.0 and includes a double nylon braided exterior.
- The DP80 is a 1.6-foot cable specified for up to 80Gbps and UHBR20, with higher listed uncompressed refresh modes such as 4K at 240Hz.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a high-end gaming setup with closely placed DP devices.
Its 80Gbps UHBR20 specification, feature set and durable construction details are appealing, provided the rest of the display chain supports the modes you want.
Measure your cable path first, then confirm the graphics card and monitor standards.
If they are compatible and the short reach works, the DP80 is a focused choice; if you need more distance, prioritize length over its higher bandwidth ceiling.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers pairing DP 2.1 UHBR20 capable graphics cards and monitors for high refresh rates or multi-monitor setups.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data rate and UHBR20 support.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D and HDCP 2.3.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.